Siddhi Rubber Udyog is leading Geocell Manufacturers from Noida.
DESCRIPTION :
High strength geocell built up is produced using polyethylene (PE) as principle natural substances, to add black masterbatch and hostile to maturing added substances, By warming and extending, make it as a sheet, After a riveting, it becomes with a three-layered network structure and has high strength and low extension proportion attributes. It is mostly utilized for extraordinary Foundation treatment of highways, desert, oceanside streets, rail lines, waterways, dams, the flood control of the cofferdam building, etc. It has a high establishment bearing limit and solid effect obstruction, Easy development, minimal expense, it is a viable high-strength geosynthetics.
Features of HDPE Steel Plastic High Strength Geo-cell are:
- 1) Corralling the roadbed of the railroad
- 2) Geocells safeguard debris and degree moving in scene direction, firm the entire roadbed, stop breakdown happening, increment street utilizing time clearly in the region where traffic is weighty.
- 3) Staling the roadbed of the thruway
- 4) Outspread geocells create highly flexible power, decrease more than half establishment thickness compare to the customary stone establishment, and reduce gravity and press in landscape direction.
- 5) Bearing stacking press in dykes and dividers
- 6) Geocells structure a specific development to forestall press in landscape direction, can be projected staged.
- 7) Regulating shallow water riverway
- 8) Be cleared in riverside slants in outspreading structure, geocells delayed up water clobbering, stable riversides bed, and backing multiplication to develop.
You can head over to our best product to read more about us Siddhi Rubber Udyog.
TYPICAL APPLICATION:
The core structure is flexible, with low to medium thickness, very high void ratio and medium – high compressive resistance; due to the channel pattern, the flow capacity is much higher in longitudinal direction than in transversal direction; it is suitable for almost all types of applications.
- Georgentte Style-Non Woven
- Metrial-Polypropylene
- 2.1mtr x 50mtr Length
- Thickness-5.5Millimeter (mm)
PROPERTIES:
Product Specifications
| Material | polypropylene(pp) | Color | White |
|---|---|---|---|
| Georgette Style | Non Woven | Length x Width | 2.1mtrX50mtr Meter (m) |
| Th�kness | 5.5 Millimeter (mm) | Application | Typical applications Site : Roads RE Wall , Levelling and mechanical protection of the geomembrane; drainage of the accidental leaks below primary ; leachate and rain water collection above primary geomembrane; mechanical protection of the geomembranes when in contact with waste-materials and/or soil; drainage of liquids and gases present in the soil above and/or below the capping geomembrane. |
Geocomposite Specifications for SIDDHI GC Fin Drains
| In-situ soil passing | Permittivity, per sec ASTM D | Maximum Apparent Opening Size, mm as |
| 0.075 mm sieve(%) | 4491/ IS 14324 : 1995 | per ASTM D4751/ IS 14294 : 1995 |
|---|---|---|
| < 15 | 0.5 | 0.43 |
| 15 to 50 | 0.2 | 0.2 |
| > 50 | 0.1 | 0.22 |
Specification for Fin drain :
| Property | Test method | Units | Minimum average Roll value |
| Tensile strength | EN ISO 10319 | kN/m | 16 |
|---|---|---|---|
| CBR Puncture Resistance | EN ISO 12236 | N | 3000 |
| Mass per unit area | EN ISO 9864 | g/m2 | 710 |
| Thickness of Composite | EN ISO 9863 | mm | 4.5 |
| In-plane permeability | |||
| (Hydraulic Gradient, i=1 at 100 kPa pressure) | EN ISO 12958 | l/m | 0.55 |
| Hydraulic Gradient, i=1 at 200 kPa pressure | EN ISO 12958 | l/m | 0.45 |
Technical Specifications:
| Width | Customized |
| Thickness | 5 mm |
|---|---|
| Application | Drainage |
| Brand | SRU |